Quadcopter Drone with Thermal Camera

Quadcopter drone with Thermal camera
Suitable to perform marine applications and to support search & rescue operations
Carbon fibre composite material of high strength
Flight controller make model specifications - Pixhawk Cube Orange Plus
Hybrid system and should allow both Auto pilot mode & Manuel operation
Frequency of operation of Drone - 2.4 GHz / 5.8 GHz
Endurance - Minimum 30 - 45 minutes continuous operation with payload
Minimum 60 minutes continuous operation without payload
Weight of sensor payload - Up to 2kg
9Payload carrying capacity - Up to 2 kg of thermal camera payload.
Source of power - Battery operated
Battery make / model - Li-Ion 30 Ah 48VDC, AHR 8C or better using Molicel P42A or P42B cells.
Operational range - Horizontal: Min. 5 km & Max. 10 km.
Vertical : up to 4 km
Motor & ESC make & model - Brushless Hobby Wing BLDC motors (H8).
Propeller details - Carbon fibre composite propeller
Drone speed - 2 - 16 m/sec @ normal wind conditions.
Remote controller / GCS make & model - Siyi mk15
Ground Control Station Software version - Mission Planner or equivalent
Other sensors - Obstacle Avoidance Radar Sensor (front)
Navigation and Communication type - Hybrid system with options for Remotely operated by pilot and Auto pilot method.
Communication receiver & Display unit - Laptop or Tab based software with navigating tools
Altitude sensor - Laser or Barometer type altimeter sensor to maintain vertical clearance of 10 m ± 0.1m from the water surface
Lock position - Drone should operate using lock position method during measurement with an positional accuracy of ± 1m range
Front mounted surveillance Camera - Min. 26 MP camera with real time video transmission system shall be mounted in front side of the drone.
Bottom mounted surveillance camera - Min. 26 MP camera with real time video transmission system shall be mounted at bottom of drone to monitor sea operations.
.
Thermal imagery camera SIYI ZT30 D optical pod four sensors camera with Gimbals
●4K Ultra HD 8MP 180X Hybrid
●30X optical zoom Gimbal camera
●640x512 thermal imaging
●320-Degree Yaw Axis Rotation
●Nose Mode
●Upside Down Mode
●Compatible with Ardu Pilot& PX4 (Mavlink)
●Ethernet, HDMI, CVBS Video Output
High Accuracy & High Collaboration Control Algorithm
Operation of thermal camera - It shall be operable from flight controller upon receiving control signal from GCS.
Stand alone battery pack shall be provided for the thermal camera working (6Ah @12VDC).
Mounting requirement of thermal imagery camera - The mounting bracket to attach the Gimbal based thermal camera at the bottom of the
drone without affecting the stability of the system.
The mounting bracket should withstand the thermal camera weight and it should be intact.
Stability @ higher wind - Should withstand coastal wind conditions up to 40 kmph at marine environment.
Thrusters - Electronically operated using BLDC motor assembly.
Thruster power - Configured using X8 or better capacity to withstand coastal wind conditions.
Weight & Dimensions - Approximate self weight of drone should be less than 20 Kg with rated propeller size and thrusters.

Spares
Motors (CW and CCW each 1 No)
Body to ARM interconnecting hinges & Arm Carbon Fibre – 2 complete set.
Battery Pack – 2 complete set at rated capacity.
Remote Controller / GCS module with dual telemetry option & RF Antenna – 1 set.
GPS Antenna – 2 Nos
Rigid Carrying Case with Industry grade trolley & wheel – 1 No.
Landing gear mechanism – 1 Set.
Power key – 2 Nos.
Battery Charger – 2 Nos.

Test & Qualification

Drone will be tested with integrated camera payload of 2kg and endurance test shall be carried out.
System acceptance procedure Drone integrated with thermal camera shall be tested at coastal conditions and open sea for thermal imaging applications.

Warranty 1 year warranty for complete system including battery packs